Hope you all enjoyed the craic in part one, or should that be CRACK!
Here’s part 2, part 3 tonight when I get home from work.
Tag Archives: Ryan Neil
Ryan Neil Willowbog Bonsai Demo Video Part 1
I sat down yesterday morning to try and edit the demo day video with Ryan at Willowbog into something shorter without missing out the interesting bits. That proved to be a hard task! Ryan keeps up the commentary, questions, and stories pretty much the whole way thorough! I have therefore got Four parts to share with you totalling 3 1/2 hours of footage! I’ll share as I get them uploaded.
This is a lot of viewing and I know that many will not want to be bothered wading through it, however, others have asked to see the complete session. Down the line I might upload some of the individual learning moments or pearls of wisdom given by Ryan.
I had a nightmare with the video camera and was missing the first few hours of footage but thankfully Phil the fingers had it recorded on our backup/closeup camera and I have edited both together.
Ryan Neil Pine Lecture Part 2
2 of 2. Now making a start on editing the demo footage. Not easy as Ryan keeps the information flow going throughout!
Ryan Neil Pine Lecture Part 1
You will have seen Ryan talking about Pines elsewhere on Youtube but I think this one is slightly more detailed and well worth a watch.
Sunday Workshop – Me
and then is was me 🙂
As previously posted, I had opted to work on this Scots Pine.
Ryan asked about its history and what way I saw the tree going. I pointed out it’s problems as I saw them, namely the roots, heavy branches in the apex and the position of the secondary trunk in relation to the main trunk.
After a look Ryan suggest that the tree be tilted to the right to change the level of the roots and solve the nebari issue. One root can be removed at repotting. He removes a few heavy branches and started me off wiring the mini apex on the right and the secondary apex in the middle with heavy wire. This allows us to change the angle of the secondary trunk more to the front.
Ryan impressed me greatly by his ability to move around the room keeping everyone on target at the right time and make adjustments when required. Peter Warren is the only other person I have seen manage this. Must be something to this Japanese apprentice carry on 🙂
As I moved around the tree wiring Ryan was able to point out a few different techniques in wiring. That 45 degree angle thing you read about in all the books and hear preached by most bonsai guru’s can be safely shelved especially when wiring with copper. I haven’t done a lot of copper wiring, strange after 18 years in bonsai, but I found it OK to be honest. Gauging the weight of the wire was the new bit for me but a few branches in, it was straight forward. Towards the end of the workshop Peter Warren stepped up and gave me a hand to get all the wiring complete on time. Cheers Peter 🙂 It was a good chance to chat about …. nah I’ll keep that conversation to myself 😀
Throughout the workshop, Ryan would appear and do a little placing of branches or adjust branches that I had placed. Then at the end he sat down to make the final adjustments. I think the whole feeling of the workshop is captured in these next photos, just look at all the smiling and laughter, a great day in good company but still achieving quality work.
Grinning like a complete eejit 🙂 why the hell not, working with Ryan Neil. Peter Warren and Peter Snart, hard to beat it I think.
and the final image
As usual the photo just doesn’t do it justice.Here is a side by side before and after.
Those left at the end got together for a wee memento photo. Good times.
Sunday Workshop – Phil
Starting with Phil’s tree, this rather large Scots Pine was selected by Phil for a particular reason. Most people who had done the workshop wanted direction with their tree or refinement. Phil however was more interested in learning techniques, most notably bending techniques. This Scots Pine was always going to need bending in some way to make it a viable bonsai sometime in the future.
This is the tree before we started.
Ryan asked for ideas about its future, some said put it back in the ground and one said put it back in the van 🙂 Ryan said that there is always something that can be done.
After some discussion about styling options with everyone there, Ryan opted to remove two of the trunks initially and set Phil to work creating jins using hand tools and a bit of rip and tear.
The next step was how to bend such a heavy branch/trunk. Ryan demonstrated the technique of sawing into the trunk and removing a very small wedge. This was then bend down to meet again and sealed. This was done in two places on the trunk.
Phil describes what the top of the jin looks like.
The branch that was to make the new apex also needed a severe bend. Ryan removed some of the thickness by creating a shari and then running copper wire along the length of the shari before Phil applied the raffia. This allowed the branch to be bent at almost 90 degrees.
Phil gets on with wiring the remainder of the tree.
Ben lends a hand with the wiring.
Ryan’s guy line setup.
Feck’n eejits the pair of them. Apologies if you find them offensive, but you try getting a photo of them without Phil the fingers getting his way!!
The spare branch which was under consideration as an apex is now jinned.
and after Ryan places the branches as a skeleton of it’s future design.
The wire team
It fitted in the van a lot easier on the way home 🙂
and just to prove it made it home….
before and after..
Sunday Workshop – General
I have decided to split the Sunday Workshop into two parts. This one will have general shots and some showing the progress of other participants trees. I have more to say about my own tree and also Phil’s one, so I’ll do that separately.
I’ve put the photos together as best I can. Most were taken by Ben as I was busy wiring, but they’ll give you a feel for the day.
First is Peter H’s very tasty Spruce. Nice to meet Peter who fitted in well with a pretty mad bunch that Sunday. He even admitted to following this blog!
Before shot
mad movement, love it!
Ryan’s works at pulling the top closer into the trunk to disguise the ‘circle’ gap.
Shari added on the one bit with younger bark.
Peter hard at work wiring
The end result
Mike Box, or Boxie had this scot’s pine with him. Mike is an old friend and was a great addition for us at the workshop. Never a dull moment. 🙂
Scary!!
Boxie’s end result
It’s all go
We did stop for lunch though
Sue’s little Juniper. We didn’t get a photo of her Black Pine. Ben really was slack in his photo duties 🙂
Caz, on her Willowbog comeback working on her Itogawa Juniper. Again, no other photos of this tree.
It was a great day. Caz and Sue left sharp as there was worries about getting home with roads starting to flood. But a few of us stayed to the bitter end. One minor alteration made to save any more drama, you know who you are 😀
Children of the Night Pose ❗
Children of the Night!
A strange title for a post, but if you know your movies, you will know this is from a rather old Vampire flick. What has this got to do with bonsai? Absolutely nothing, but for some reason it became the buzz word/phrase for our evening socializing. Long story, don’t ask. We will just say that Vlad the Impaler came up in conversation while drinking red wine and Dave Jones ran with the theme 🙂
Over the few nights we stayed at Willowbog we had some great times chatting into the wee hours, well late evening, about all things bonsai and a few other things besides. Peter and Jean’s hospitality knows no bounds and having the chance to chat with Ryan Peter W and Peter S about bonsai and life in Japan was one of the trip highlights.
WE even had these two muppets to keep us all entertained 🙂
Arrival
On our arrival at Willowbog we sought out the boss to let them know we had arrived. As we couldn’t find Jean, we had to make do with Peter Snart 🙂
The Friday workshop was coming to an end with a few members already away but the die-hards with four wheel drive were still there finishing off their session with Ryan Neil. I didn’t want to be in everyone’s faces with a camera but did manage a few shots of how things had gone on the day.
A general shot of what greeted us at the door. Phil the fingers strikes again! 🙂
Peter greets us and looks like he’s had a hard day on the digger clearing the snow. Must be nerve racking worrying about a big event being cancelled due to the weather! Ben seeks revenge on Phil for a long long van ride 🙂 The demo tree for Saturday can be seen in shot, already lifted into place.
We had a quick look at some of the trees that had been worked on during the Thursday and Friday workshops. Some impressive trees.
As soon as the workshop cleared we got to work to help Peter set up the demo area for the following day. Work for your supper if you like. Peter was putting the three of us up and we were keen to help out as staff as much as possible during our stay.
Peter’s big Yew wheeled into place and ready to go.
Dave Jones of Walsall Ceramics was also staying and had a great stand ready of any sales.
Back Home….
…After an amazing weekend. I’ve plenty of photos and such like to keep me busy here for the week.
I have had numerous requests for the video footage from the demo from those who were there. that tells you all you need to know. This will be edited once my software issues are resolved.
I’m shattered and am going to get an early night but check back for a full run down of a fantastic weekend.
I must finish by saying a massive thank you to Peter and Jean for having three of us as house guests at the same time as Peter Warren, Ryan Neil and David Jones. You are truly special friends.
Bonsai Eejit 