Jan 22 2017

Steve’s Bonsai Garden

When I was over at Suruyama Towers the other week I had the pleasure of spending a few hours with Steve McKee who was visiting. Steve and I have a fair bit in common and it was good to get a walk around the trees and chat bonsai.

Steve picked up a nice Literati Scots Pine from Peter when he was there and I have been following what’s happened since on Steve’s Facebook page ” Steve’s Bonsai Garden”.

This is the Pine as bought.

16174428_1210604675683942_7779309180085595144_n 16195163_1210604662350610_720026213594000050_n

Steve has since worked on the tree with Paul Finch and this is the result. More photos over on his FB page.

16174713_1210604719017271_8378638320115034562_n

Steve has a fantastic collect of trees and and great garden layout.

11071119_776795355731545_1200373301238275292_n

Well worth a follow over on Facebook to see more of his trees and follow his exploits around some of the exhibition in the UK.

Here’s a link to his page again to save you a search: Steve’s Bonsai Garden

Jan 15 2017

Steve’s Work

During my time with Mr Warren, Steve Salisian from LA was busy working away beside me. I thought I’d share his work here for you to see.

The first tree is a Sabina Juniper with great deadwood and movement.

imag2813

Portuguese Oak

Another Portuguese Oak

A raft style Yew

Japanese Maple

Thanks for adding to my experiences for the week Steve, look forward to catching up with you in LA in May. 🙂

Jan 14 2017

Sabina Juniper

Peter told me to pick something out to work on and I fancied a Juniper. With lots of great material to pick from both large and small, I opted for this Kifu sized one. I was left to figure out what options we had for the tree and if possible make it good from both sides. Most of Peter’s smaller (shohin) trees are good for either side, a great option for shohin display stands. Be nice to do the same with this one even at Kifu size. I gave the tree a preliminary clean up allowing me to study the trunk movement and branch structure a little more. Steve and I had a play around with it looking at a few possible angle changes both up and down. However what drew me to the tree in the first place was the angle it was at now. I gave my ideas to Peter just adding a possible tilt forward. I wanted to try and get two apexes on the tree but more separation was needed between the two main branches. As the lower one had shari, we opted to split the deadwood from the live vein a little to allow us to lower the branch further. A slightly risky procedure but fun. First Peter explained that before we carried out the split and bend that we should first look and see what other options we have if it goes wrong as a back up plan. There was a nice tree even if we lost the branch that was to be split.

The back..

and front…

Vein to be split from deadwood.

Making a start

Raffia applied

Wired up.

Initial bend put in place with an option to drop further if required.

Showing the amazing movement and twisting live vein.

During the wiring process

After wiring and lime sulphur was applied. Again the tree was not styled to look refined now. This is a Sabina with flower buds. As the foliage that is flowering now will die back when finished, we leave more of the fresher growth in behind to allow the foliage mass to be rebuilt later this year. There’s no point in fine wiring flowering areas when it will be removed within a year. What is important is the placement of the primary and secondary branches that will form the structure of the tree in years to come. A lesson learned from Peter all week – no point wiring what is being removed soon. An enthusiast may like to create the best image possible right now but is it good for the tree and a speedier development? No it’s not. Do what is required and move on to the next challenge. I still probably wired branches in this one that didn’t need it. A hard habit to break.

A check to see that it still falls within Kifu size.

It looks good from the other side too, but I forgot to take a photo 😦 A great tree to play with and I learnt a few things about Sabina along the way. Win Win.

Jan 13 2017

Iwasaki Japanese White Pine

I posted on this last week but I wanted to revisit the tree here and get all the photos in one place. As stated, this tree was part of the Iwasaki Collection in Japan. I have pinched Peter’s text from his Facebook page explaining a little about how he came to have the trees.

Last May I took a very short trip to Japan as I was invited by Mr. Morimae of S-Cube Bonsai to have a sneak preview of the sale of the Iwasaki Collection.
As you may or may not be aware, Mr. Iwasaki was one of the premier collectors of bonsai in Japan over the last fifty years and he amassed a huge collection. He passed away several years ago and after lots of issues were resolved the collection was put up for sale and it was purchased by S-Cube

Due to my long standing relationship with Mr. Morimae, he let me get into the collection before 95% of the Japanese Bonsai world, let alone anybody from outside of Japan. As a result I got to choose a number of very special trees for a number of clients as well as some for myself to sell or style them and keep until someone wanted them. Finally, they got back here after a long process of quarantine. As they are trees with history and pedigree, some of them will be for sale, some of them not. There are a couple that I want to restyle this year but most of them are suffering a little from the importation and there are a few blind buds and branches so major work will wait until next year.

What you can’t tell so easily from the photos is the depth of character in the bark, the struggle these trees have been through giving them genuine old school bonsai flavour. These aren’t average pines which have been grown quickly and made to look pretty, these have age, character and class.
There are another bunch of trees that didn’t make it into the van this time but I should have them by the end of the week, as well as some non Iwasaki collection pines.
As with most of the trees that I put up, 95% of them are for sale but not to somebody I do not trust to look after them and not until I am 100% happy with their health.

On arrival at Peter’s last week I was given the task of clearing out the dead twigs and branches on this tree. Some had been lost during quarantine perhaps due to the fact that they were over due a repot and maybe watering was difficult to get right. Peter has turned the health around and there were many strong shoots on the tree.

This is it as I started.

Here after I cleared out the majority of the dead branches. Some left for jin as required.

Peter then informed me that I would be working on this tree for the first few days. A great honour to be trusted with the work on such a tree. My first job was to go through the tree removing shoots that were too strong, mostly towards the apex and then do some bud thinning. This is it before.

And after that process.

I then worked my way up the tree wiring each branch after discussion with Peter. So many little tips were given during this process. Information on JWP, wiring, branch placement, health etc. Below is the tree as we finished the work. This was not styled to look it best now, but shaped for the health of the weaker lower branches and gaining better structure in the next 5 years. A new front was selected due to brach removal but Peter was keen to point out that it must look good from all angles and we constantly spun the tree during the whole styling process.

Final tweaks

Structure from underneath.

A happy me, tired but happy 🙂

Covetous eyes…

Check out the video clip…

Error

This video doesn’t exist

Jan 12 2017

Reflection On a Great Week

Back home a few days now after a week away studying at Saruyama Bonsai. I’ve been giving some thought to all the little things that I learned in my time with Peter and also a few bigger things that are more concepts or approaches to creating bonsai. In all I think I got what I wanted from my time and I think Peter was happy with the work I did on his trees. I will now use what I’ve learned here to help progress Bonsai in Ireland and I hope to get back to Peter’s place again soon.

I’ve been through all my photos of the week and want to add them here as a reference for my work and also a memory of the good times had. I did a little posting when I had time during the week, usually in bed, but I’d like to be a little more comprehensive now I’m home. There’s a lot so I’m going to upload them as albums here and split them up over a few different headings. I’ll start with a few general shots from around the nursery.

Thanks to all those who I met at Peter’s place. It was great to work with Steve Salisian over from the United States and see his approach to bonsai, much of it gleaned from his sessions with Ryan Neil. Also to Jose, Steve and Les, who popped in for a few hours during my stay. Good to have time to actually chat to them rather than during the manic atmosphere at Exhibitions. And of course a big thank you to Peter, a great host, teacher and artist and Satomi who made me feel so welcome.

Steve McKee visiting for a few hours

Steve Salisian hard at work.

Jose stopping by for a cheeky beer after a hard days work.

Les spending a few hours with us on Monday, great to catch up.

And the boss, cheers Peter.

The rest of the general shots from the week….

Jan 4 2017

A Flying Start….

Well, one more sleep and I get my bonsai adventures in 2017 off to a flying start. This Thursday, bright and breezy, I pop over to London to spend 6 days at Monkey Mountain with Peter Warren. My New Year’s resolution was to push bonsai learning in Ireland as much as I can for the next 12 months. This starts with me 🙂 We should all strive to learn and, having worked with Peter many times before, I can’t think of anyone better to burden myself on for a week. Peter is now offering the option to study with him at his home. Once I heard this, I was on it like a car bonnet and it looks like I beat my way to the (joint) first spot. Really looking forward to my time in the big smoke and making a few new friends, but more on that during the week I think.

Jan 1 2017

Happy New Year

This is a year I’m really looking forward to. I’ve loads of bonsai related trips planned and I’m looking forward to sharing them all here with you. More on that in the New Year.

I’ll just leave you all now and say Happy New Year to all my Bonsai friends around the world. I’m really looking forward to making some new friends on my travels in 2017. Eejit coming your way soon 🙂

Dec 31 2016

Cascade Japanese Black Pine

I finally got around to doing a little work on my new Shohin Japanese Black Pine. I picked this one up whilst on holiday in Tenerife back in October. A visit to Bonsai Centro Tenerife and a chat with Jose Acuna did the job.

This is it as purchased.

and after a little work.

A slightly different angle.

As a large shohin I like the fact that it has possibilities for reversing it in a box stand to fit different displays. Here’s the back.

and the other sides just for giggles.

Jose gave me a few earlier photos of it which I’ll share here too to keeps my records all in one place.

OLYMPUS DIGITAL CAMERA

Dec 30 2016

New Toy – Sony 6000

Santa was good to me, I have acquired a new toy and have been playing a little.

sony_alpha_ilce-6000_2014_cp

I now have the Sony 6000 camera. My old Nikon D5000 had it’s limits were video was concerned and I was looking something for up coming holidays that was a little more compact. I’m no camera buff, I know what I need it to do to allow me to capture images and video for the blog, and this little fella fits the bill. I have a few add-ons to get my hands on but so far I am loving what it can do. Mirrorless cameras have really closed the gap with the DLSR range!

Dec 20 2016

Shohin Zelkova

This one is new to my collection this year. An old tree that originally was an import to the UK back in the late 80’s, it lost it’s apex when with the previous owner. I got the tree back in June as I saw some potential in making it into an even smaller shohin tree.

This was the tree as acquired. A bit weak with some dead branching. It hadn’t been fed much in recent years.

when I got it home.

I cut down the height by about 2 inches and cut the leggy branches back quite hard. After a few months free growth it had produced some new fine growth.

I was able to do a little wiring once it dropped leaves for Winter. This is it after work. Some branches left long and will be left for another year to thicken branches as required. New beginnings, we’ll see how it goes. Major repot required this Spring.